Pepperl+Fuchs NBN30-U1-A2-194786 

Inductive sensor NBN30-U1-A2

• Sensor head bidirectional and rotatable
• 30 mm non-flush
• 4 LEDs indicator for 360° visibility

• General specifications
  Switching function		complementary
  Output type		PNP
  Rated operating distance		30 mm
  Installation		non-flush
  Output polarity		DC
  Assured operating distance		0 ... 24.3 mm
  Reduction factor rAl		0.33
  Reduction factor rCu		0.31
  Reduction factor r304		0.74
  Reduction factor rBrass		0.38
  Output type		4-wire
  Nominal ratings
  Operating voltage		10 ... 30 V
  Switching frequency		0 ... 230 Hz
  Hysteresis		typ. 5 %
  Reverse polarity protection		reverse polarity protected
  Short-circuit protection		pulsing
  Voltage drop		≤ 2 V
  Operating current		0 ... 200 mA
  Off-state current		0 ... 0.5 mA
  No-load supply current		≤ 20 mA
  Time delay before availability		80 ms
  Operating voltage indicator		LED, green
  Switching state indicator		LED, yellow
  Functional safety related parameters
  MTTFd		1057 a
  Mission Time (TM)		20 a
  Diagnostic Coverage (DC)		0 %
  Compliance with standards and directives
  Standard conformity
  	Standards	EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012
  Approvals and certificates
  EAC conformity		TR CU 020/2011
  UL approval		cULus Listed, General Purpose
  CCC approval		CCC approval / marking not required for products rated ≤36 V
  Ambient conditions
  Ambient temperature		-25 ... 85 °C (-13 ... 185 °F)
  Mechanical specifications
  Connection type		screw terminals
  Information for connection		A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %
  Core cross-section		up to 2.5 mm2
  	Minimum core cross-section	without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2
  	Maximum core cross-section	without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2
  Housing material		PA/metal with epoxy powder coating
  Sensing face		PA
  Housing base		plastic
  Degree of protection		IP68 / IP69K
  Mass		225 g
  Note		Tightening torque: 1.8 Nm (housing)

   

  Classifications

  System	Classcode
  ECLASS 11.0	27270101
  ECLASS 10.0.1	27270101
  ECLASS 9.0	27270101
  ECLASS 8.0	27270101
  ECLASS 5.1	27270101
  ETIM 8.0	EC002714
  ETIM 7.0	EC002714
  ETIM 6.0	EC002714
  ETIM 5.0	EC002714
  UNSPSC 12.1	39121550